Printer (menu) settings

Change cutter type
This setting defines the type of cutter the printer has installed. The options are: SILENT This is the old Silent Cutter assembly used on old Ghostwri...
Tue, 31 Mar, 2020 at 10:57 AM
Change cutter speed
This setting defines the cut speed of a BOCA cutter type.  The options are: NORMAL (factory default) for 7.5 mil (.0075”) or thinner paper. SLOW ...
Tue, 10 Nov, 2020 at 9:26 AM
Change print mode
Print mode defines the setup for the retract after the automatic ticket length calculation feature. Value Description THERMAL The printer will feed o...
Mon, 22 Jun, 2020 at 4:05 PM
Change ski mode
Ski mode prevents the printer from backing up more than a ½ inch to prevent tearing of ski labels. This setting creates an unprintable area on the first .50...
Mon, 22 Jun, 2020 at 4:08 PM
BOCA self-test ticket explanation
Many settings are printed on the BOCA self-test ticket. These can be useful when settings may need to be changed.  The self-test ticket can easily be pr...
Fri, 27 Nov, 2020 at 10:58 AM
Exit opto (Ticket Taken Sensor)
A BOCA printer can be equipped with a ticket taken sensor (exit opto) that indicates if the ticket was taken from the printer. The printer signals back to t...
Thu, 4 Feb, 2021 at 10:03 AM
Translation table command
From FGL22/42 and up it is possible to have the BOCA printer "translate" between two Code pages. This can be useful when the computer cannot trans...
Wed, 17 Jun, 2020 at 11:55 AM
TrueType font character set command
The TrueType Font Character Set command - <TTCP#> and <ttcp#> allows you to change the character set of the downloaded true type. The TrueTy...
Fri, 17 Jul, 2020 at 3:40 PM
Font encoding command
The font encoding command permanently sets the font encoding used with special two-byte character fonts. This feature is set at the factory and should norma...
Mon, 22 Jun, 2020 at 4:28 PM
Change orientation setting
Due to a variety of legacy issues and driver limitations, an adjustable FGL printer operating in portrait mode requires a reversed orientation <rte> i...
Mon, 22 Jun, 2020 at 4:52 PM