Printer (menu) settings
This manual is only applicable to RADJW & RADJ4 paper guide printers. After the slider in the paper guide has been positioned correctly, the print hea...
Thu, 3 Sep, 2020 at 3:33 PM
Print speed controls the speed the ticket travels at. The slower the speed the darker the printing. The values can range from 0-7. Value Speed 0 Fast...
Thu, 26 Mar, 2020 at 12:25 PM
Print intensity controls the darkness of ticket print out. In the printer’s menu you have the following choices. Intensity LIGHT MED LIGHT NORMA...
Thu, 26 Mar, 2020 at 12:26 PM
When using a (DHCP) dynamic IP address make sure the ‘ETHERNET’ setting is set to ‘DHCP/SUB/GATE’. Please follow these steps to set a dynamic IP address on ...
Mon, 11 May, 2020 at 12:21 PM
When using a (fixed) static IP address make sure the ‘ETHERNET’ setting is set to ‘YES’. Please follow these steps to set a static IP address on your Ethern...
Tue, 31 Mar, 2020 at 11:43 AM
The printer can be reset to the factory defaults using a few different methods. Be aware that all custom settings made to the printer will be lost. Using ...
Thu, 26 Mar, 2020 at 12:32 PM
This procedure will clear all stored logos and fonts stored in the user accessible memory. They will be permanently deleted. Depress both the MENU and ...
Fri, 1 May, 2020 at 2:20 PM
The Mini/Micro? setting defines if the printer has a cutter unit installed. Value Description FGL command MINI Is for a printer with a Cutter Assembly...
Tue, 16 Jun, 2020 at 5:55 PM
During normal (multiple ticket mode) operation, the printer will stop for several hundred milliseconds within each ticket to allow the cutter to cycle. Thi...
Fri, 1 May, 2020 at 2:14 PM
There are three approved ways to install a Boca Systems USB printer. The 26/46 model printers can operate as a USB printer, a USB HID device or USB virtual ...
Thu, 30 Jun, 2022 at 11:00 AM