Printer (menu) settings
There are three approved ways to install a Boca Systems USB printer. The 26/46 model printers can operate as a USB printer, a USB HID device or USB virtual ...
Thu, 30 Jun, 2022 at 11:00 AM
This setting defines the type of cutter the printer has installed. The options are: SILENT This is the old Silent Cutter assembly used on old Ghostwri...
Tue, 31 Mar, 2020 at 10:57 AM
This setting defines the cut speed of a BOCA cutter type. The options are: NORMAL (factory default) for 7.5 mil (.0075”) or thinner paper. SLOW ...
Tue, 10 Nov, 2020 at 9:26 AM
Print mode defines the setup for the retract after the automatic ticket length calculation feature. Value Description THERMAL The printer will feed o...
Mon, 22 Jun, 2020 at 4:05 PM
Ski mode prevents the printer from backing up more than a ½ inch to prevent tearing of ski labels. This setting creates an unprintable area on the first .50...
Mon, 22 Jun, 2020 at 4:08 PM
Many settings are printed on the BOCA self-test ticket. These can be useful when settings may need to be changed. The self-test ticket can easily be pr...
Fri, 27 Nov, 2020 at 10:58 AM
A BOCA printer can be equipped with a ticket taken sensor (exit opto) that indicates if the ticket was taken from the printer. The printer signals back to t...
Thu, 4 Feb, 2021 at 10:03 AM
From FGL22/42 and up it is possible to have the BOCA printer "translate" between two Code pages. This can be useful when the computer cannot trans...
Wed, 17 Jun, 2020 at 11:55 AM
The TrueType Font Character Set command - <TTCP#> and <ttcp#> allows you to change the character set of the downloaded true type. The TrueTy...
Fri, 28 Oct, 2022 at 11:16 AM
The font encoding command permanently sets the font encoding used with special two-byte character fonts. This feature is set at the factory and should norma...
Mon, 27 Nov, 2023 at 10:20 AM