BOCA Printer troubleshooting
When a printer is setup for DHCP (dynamic IP address) setup, make sure you switch the printer on with the Ethernet cable connected. The printer will only tr...
Thu, 28 Oct, 2021 at 12:18 PM
My BOCA Printer fails to power-up, what can I do? The AC power cord connected to your printer may be faulty; try another cord. The AC outlet may be faul...
Mon, 11 May, 2020 at 2:55 PM
If your printer shows "cutter failure" on the display at power on, you may try the steps below to solve this issue. On the ID tag of the print...
Tue, 31 Mar, 2020 at 10:43 AM
During shipment of your printer there is a possibility that the guillotine cutter knife became trapped under the stationary cutter blade. This will cause th...
Tue, 31 Mar, 2020 at 9:59 AM
Parallel (or Serial) to USB (or Ethernet) adapter cable While some of our customers claim to have successfully used Parallel or Serial to USB or Ethernet c...
Tue, 31 Mar, 2020 at 12:25 PM
Not all Boca fonts support German and/or International characters. The fonts that do, support German characters at both their "original" character...
Fri, 30 Apr, 2021 at 11:25 AM
To print the euro sign you need to make sure that when sending ticket data to the printer, the data is formatted according to Code page 850. This is the way...
Wed, 17 Jun, 2020 at 11:57 AM
On a printer with a cutter unit installed the cutter cannot be switched off to act as a printer without a cutter. It is not possible to manually tear-off a ...
Wed, 24 Jun, 2020 at 2:58 PM
On a printer with a cutter unit installed the cutter cannot be switched off to act as a printer without a cutter. It is not possible to manually tear-off a ...
Wed, 24 Jun, 2020 at 2:58 PM
The BOCA printers are not designed to be used from two or more computers at the same time. The printer will mix-up any data that arrives in its input buffer...
Thu, 2 Jul, 2020 at 9:13 AM