Identification

The articles help you identify most common part in the BOCA printer

How to find the serial number of my BOCA printer?
BOCA printers can be ordered and setup for many different configurations. For that reason, we request the serial number to look up the exact specifications ...
Tue, 7 Jul, 2020 at 1:43 PM
How to identify the interfaces on my BOCA
The BOCA Lemur printer models are supplied with a number of interfaces.  Below is an overview to identify the interfaces on the various models Interface p...
Mon, 27 Jul, 2020 at 12:20 PM
Print head identification
Looking at the printer’s serial number tag, the below chart should aid in determining the correct print head to order.   On the Lemur ID label look a...
Tue, 11 Aug, 2020 at 11:11 AM
Print head cable identification and orientation
The list below helps you to identify the type of print head cable installed in your BOCA printer. It also shows the correct orientation where possible. ...
Tue, 11 Aug, 2020 at 11:11 AM
Opto detector identification
The opto detectors are used to detect paper and position the ticket. The list below helps you to identify the type of opto detector is used in your BOCA pri...
Thu, 8 Jul, 2021 at 10:34 AM
Cutter unit identification
If your BOCA printer is equipped with the optional cutter you may use the list below to identify the model used in your printer. Ghostwriter models ...
Thu, 12 Jan, 2023 at 5:31 PM
Paper guide configurations
The paper guide is used to guide your tickets through the printer. The overview below helps you to identify the type of paper guide configuration is used in...
Wed, 11 Nov, 2020 at 4:21 PM
Platen identification
Below you will find an overview of the most commonly used platens (rubber rollers) on the Lemur models. Not all platen variation may/will be shown.    Not...
Mon, 26 Jun, 2023 at 10:50 AM