The paper guide is used to guide your tickets through the printer. The overview below helps you to identify the type of paper guide configuration is used in your BOCA printer.
Lemur series printers
From September 2009 to October 2019
RADJW (Reverse Adjustable Wide)
- Maximum print width is 3.25”.
- The slider bar is adjustable for use with media widths ranging from 2” up to 3.25”.
- Requires the use of ticket stock with a reverse adjustable timing mark.
- Ticket stock comes out on the left-hand side as you face where the tickets exit the printer.
- Size of the print width may be adjusted via control panel (special head setting) to match the width of the media being used. Size is justified from the bottom of the media.
- Paper path width and special head setting is configured from factory as ordered.
Above shows slider bar and sensor locations
RADJ4 (Reverse Adjustable 4”)
- Maximum print width is 4.0”.
- The slider bar is adjustable for use with media widths ranging from 2” up to 4”.
- Requires the use of ticket stock with a reverse adjustable timing mark.
- Ticket stock comes out on the left-hand side as you face where the tickets exit the printer.
- Size of the print width may be adjusted via control panel (special head setting) to match the width of the media being used. Size is justified from the bottom of the media.
- Paper path width and special head setting is configured from factory as ordered.
Above shows slider bar and sensor locations
ADJ4 (Adjustable 4”)
- Maximum print width is 4.0”.
- The slider bar is adjustable for use with media widths ranging from 2” up to 4”.
- Requires the use of ticket stock with an adjustable timing mark.
- Ticket stock comes out on the right-hand side as you face where the tickets exit the printer.
- Print width is not able to be adjusted and stays at maximum 4.0”.
- Paper path width is configured from factory as ordered.
Above shows slider bar and sensor locations
ADJW (Adjustable Wide)
- Maximum print width is 3.25”.
- The slider bar is adjustable for use with media widths ranging from 2” up to 3.25”.
- Requires the use of ticket stock with an adjustable timing mark.
- Ticket stock comes out on the right-hand side as you face where the tickets exit the printer.
- Print width is not able to be adjusted and stays at maximum 3.25”.
- Paper path width is configured from factory as ordered.
Above shows slider bar and sensor locations
ADJ2 (Adjustable 2")
- Maximum print width is 2.0”.
- The slider bar is adjustable for use with media widths ranging from 1” up to 2”.
- Requires the use of ticket stock with an adjustable timing mark.
- Ticket stock comes out on the right-hand side as you face where the tickets exit the printer.
- Print width is not able to be adjusted and stays at maximum.
- Paper path width is configured from factory as ordered.
Above shows slider bar and sensor locations
Lemur UPG series printers
From November 2019 to Present
UPG (Universal Paper Guide)
Since November 2019 the Lemur printers have switched over to Universal Paper Guide (UPG)
The UPG allows a customer to do several things that were not possible with the previous paper guide design, including:
- Greater range of opto adjustments
- Easier ticket loading
- Convert between Adjustable (ADJ) and Reverse Adjustable (RADJ) configuration (technical training required)
- Convert between top and bottom opto for full-sized models (technical training required)
Ticket stock comes out on the right-hand side as you face where the tickets exit the printer for all paper path configurations.
ADJ4 (print width 2” – 4”), ADJW (print width 2” – 3.25”) & ADJ2 (print width 1” to 2”)
- Requires the use of ticket stock with an adjustable timing mark
- Paper path width is configured from factory as ordered.
Above shows slider bar and sensor locations
RADJ4 (print width 2” – 4”) or RADJW (print width 2” to 3.25”)
- Requires the use of ticket stock with a reverse adjustable timing mark
- Some applications may require the use of a special head setting if the printout is positioned too far from the top of the ticket. The setting will adjust the printout towards the top of the ticket.
- Paper path width is configured from factory as ordered.
Above shows slider bar and sensor locations
Note: Lemur-X UPG and Lemur-C UPG configurations may be different from the images above.