Maintenance
The print head should be cleaned periodically to prevent debris from building up on the print element. The required cleaning interval varies greatly dependi...
Fri, 27 Mar, 2020 at 3:10 PM
The print head should be cleaned periodically to prevent debris from building up on the print element. The required cleaning interval varies greatly dependi...
Wed, 25 Jan, 2023 at 12:48 PM
The Platen (rubber drive roller) should be cleaned once a year to prevent paper dust from building up on the roller. NOTE: The platen may require more f...
Tue, 14 Apr, 2020 at 12:01 PM
A lemur printer with Universal Paper Guide (UPG) has two optical sensors (optos) to detect the presence and position of the tickets. These sensors need clea...
Tue, 3 Oct, 2023 at 4:50 PM
A lemur printer has two optical sensors (optos) to detect the presence and position of the tickets. These sensors need cleaning periodically or when paper d...
Tue, 3 Oct, 2023 at 4:52 PM
A lemur-X printer has two optical sensors (optos) to detect the presence and position of the tickets. These sensors needs cleaning periodically or when pape...
Fri, 6 Jan, 2023 at 3:48 PM
If the cutter on the Lemur series printer is constantly cutting through adhesive media then the cutter knife will get gummed up with adhesive which will aff...
Fri, 27 Mar, 2020 at 1:58 PM
The BC cutter with the SQ opto setup may need cleaning when the printer is not able to detect the position of the blade. This usually results in a cutter fa...
Wed, 1 Apr, 2020 at 11:19 AM
The paper path should be cleaned periodically to prevent erratic printer operation. Cleaning is normally done every three to four months or when you note a...
Tue, 14 Apr, 2020 at 11:56 AM
The paper path should be cleaned periodically to prevent erratic printer operation. Cleaning is normally done every three to four months or when you note an...
Fri, 1 May, 2020 at 12:36 PM