The base mounting adapter (p/n A424077) enables the Lemur-Z to have similar mounting holes as a Zebra KR203 and KR403 printer. It also allows it to be used with the quick fit hubs (p/n A42406-2) when the retracting feature of the printer is not being used.
Using the three Philip head #4-40 self-tapping screws, that came with the plate, to mount the plate onto the bottom of the Lemur-Z printer. The side of the plate that has countersink holes needs to face away from the bottom of the printer.
Care needs to be taken concerning mounting screw length, see guide below. The use of the incorrect length screw may damage the circuit board.
