The information below is for Lemur printers built prior to Oct. 23, 2023.

Our Lemur printers  may be ordered with an optional cash drawer connection. This port is designed to work with the cash drawer’s 24VDC solenoid. The ticketing software will need to provide a <DA> command to the printer in order for us to activate the cash drawer port solenoid Sending <DA> to the printer will generate a 24Volts 50ms pulse to open the Cash draw. 

Alternatively, you can set the menu item “Auto Cash Drawer” to “Yes” which will activate the cash draw interface whenever a print command is received. This still allows you to open a drawer even when your program is not able to send an additional <DA> command or when using the FGL print driver.

On the Lemur printer models built prior to Oct. 23, 2023 (except Lemur-C and Lemur-X), a 3.5mm stereo mini jack female connector is used for the Cash draw interface. 


  1. The ticketing software needs to be able to send down the necessary command to be able to activate our cash drawer port.  If the software is not sending down the appropriate command then the printer will need to be put in auto cash drawer mode.
  2. We do not supply the external cable to the cash drawer. However we do supply a conversion cable (3.5 mini jack male to RJ12 female, part number A0050, image below) that would allow for an EPSON compatible cable to be connected.
  3. Our cash drawer port sends a 50ms 24Vdc signal to the solenoid of a cash drawer.  We recommend you check with the cash drawer manufacture to confirm their cash drawer is able to support this signal and maybe they may also have a readymade cable to work with our printer.