The BOCA Lemur printers can be ordered with a vertical mounting plate for installation in the desktop.

 

  • Prepare the counter top by cutting a rectangular hole in accordance with the dimensions specified for your printer model
    NOTE: The table or counter top must be able to support at least four times the weight of the printer
  • Attach the top plate to the printer using only the supplied mounting hardware
  • Insert the printer with the top plate attached into the countertop cutout
  • Attach the power cord and the interface cable to the printer
  • Turn the power switch to the ON position
  • The printer is now ready for ticket stock to be loaded
  • Keep sufficient space underneath the printer for the ticket stock

 

 Standard size

The Lemur printer extends down approx. 216mm (8.5") from the top of the desktop

 

For comparison:

  • The Ghostwriter Vertical Micro extends down approx. 254mm (12")
  • The Ghostwriter Vertical SubMicro & Vertical X-Micro extend down approx. 241mm (9.5")
  • The Ghostwriter VM, Vertical Mini, Vertical SubMini and Vertical X-Mini extend down approx. 285mm (11.2")

 

BOCA Lemur can be supplied with bigger top plates that match the Ghostwriter series without cutter (MICRO)

 

(This if current box office situation was originally prepared for the old style top plates and new printers need

to be installed in existing counters)

The Lemur printer extends down approx. 216mm (8.5") from the top of the desktop

 

For comparison:

  • The Ghostwriter Vertical Micro extends down approx. 254mm (12")
  • The Ghostwriter Vertical SubMicro & Vertical X-Micro extend down approx. 241mm (9.5")
  • The Ghostwriter VM, Vertical Mini, Vertical SubMini and Vertical X-Mini extend down approx. 285mm (11.2")